Search
Search Criteria
Products meeting the search criteria
5 inch/125mm double layer diamond bush hammer tool, plato de bujarda for concrete and stone floor (ABH001-125mm)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- Wide Use: For marble, granite and concrete floor grinding and texturing 1. Creates anti-slip finish on granite and marble 2. Remove hard coatings and overlays 3. Surface prep for coatings 4. Quickly expose large aggregate 5. Increase concrete bonding effectiveness
- Adapt To Low Speed Polisher: Makita 9227CB/ 9237CB speed adjustable polisher is suggested for the bush hammer tool. Do not recommend to operate with speed too high, ideally less than 1000 RPM.
- Size: 5 inch double plates, about 4.3 inch high
- Lichi Rollers: 3 rollers, Each roller with 30 pins, coarse lichi finish on surface.
- Replacement Roller and SDS Shank Bush Hammer Available In ACTINTOOL Store
- 6 inch bush hammer plate with 4 rollers is also available in Actintool store
- The bearing is wear item, please replace the broken one. Check the instruction in this website: replace bearing instruction.
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on speed adjustable polisher, such as makita9227CB/ 9237CB polisher, suggested speed less than 1000 RPM. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
6 inch/150mm plate lichi finish diamond bush hammer tool for angle grinder (ABH002-150mm)
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- Wide Use: 1.Creates anti-slip finish on granite and marble 2.Remove hard coatings and overlays 3.Surface prep for coatings 4.Quickly expose large aggregate 5.Increase concrete bonding effectiveness
- Adapt To Low Speed Polisher: Makita 9227CB/ 9237CB speed adjustable polisher is suggested for the bush hammer tool. Do not recommend to operate with speed too high, ideally less than 1000 RPM.
- Size: double layer plates, two plates in different size, one 6 inch, the other one 5 inch.
- Roller : 4 rollers, each roller with 30 tips.
- Floor coating removing and surface texturing
- The bearing is wear item, please replace the broken one. Check the instruction in this website: replace bearing instruction.
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on speed adjustable polisher, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
5 inch/125mm plate tungsten star roller diamond bush hammer tool (ABT003-125mm)
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- Functions: 1. Creates anti-slip finish on granite and marble 2. Remove hard coatings and overlays 3. Surface prep for coatings 4. Quickly expose large aggregate 5. Increase concrete bonding effectiveness
- Adapt To Low Speed Polisher: Makita 9227CB/ 9237CB is suggested with speed adjustable. Do not recommend to operate with speed too high, ideally less than 1000 RPM.
- Best for granite and marble floor texturing, create antislip finish on stone surface
- Size: 5 inch double plates
- Roller: 3 rollers, each roller with 2 pcs star blade, one blade with 10 teeth.
- Single 5 inch plate also available in actintool store
- Contact seller to buy replacement roller
- The bearing is wear item, please replace the broken one. Check the instruction in this website: replace bearing instruction.
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on low speed polisher, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
5 inch /125mm single plate star tungsten roller bush hammer for angle grinder (ABT005-125MM)
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- 5 inch single plate star roller bush hammer tool for low speed polisher.
- Create fine pointed finish on stone and concrete surface, mostly used on bathroom floor, stairs for antislip purpose.
- Fit with speed adjustable angle grinder or polisher, suggested RPM less than 1000 RPM
- Hard tungsten roller with 10 tips to create fine finish on stone and concrete surface
- 3 star type rollers installed on a 5 inch plate
- Check actintool store for other coarse finish bush hammer tools
- N.W about 3.7 ibs
- Ship from China warehouse, 1-3 handling days, receive in 5-10 days.
- The bearing is wear item, please replace the broken one. Check the instruction in this website: replace bearing instruction.
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on speed adjustable polisher, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
- Fast Shipping: For products not stocked in Us, Ship from China Warehouse in 2 days, normally receive in 5-10 days.
- Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
- Payment Safety: All transactions are SSL-protected and guaranteed safe
- Your Privacy: We will never share your information with anyone.
5 inch/125mm knurling tungsten roller sandblasting finish bush hammer tool (ABT004-125mm)
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- 5 inch single plate sandbasting bush hammer tool for low speed polisher
- Create fine sandblasting finish on stone and concrete surface, mostly used on bathroom floor, stairs for antislip purpose.
- Fit with speed low speed polisher, suggested RPM less than 1000 RPM
- Super hard tungsten roller with 312 small tips to create fine finish on stone surface
- 3 knurling type rollers installed on a 5 inch plate
- Check actintool store for other coarse finish bush hammer tools
- N.W about 3.7 ibs
- Ship from China warehouse, 1-3 handling days, receive in 5-10 days.
- The bearing is wear item, please replace the broken one. Check the instruction in this website: replace bearing instruction.
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on speed adjustable polisher, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: For products not stocked in Us, Ship from China Warehouse in 2 days, normally receive in 5-10 days.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
HTC 270mm bush hammer with 6*45 pins rollers (ABHTC019-270mm)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
- 10 5/8 inch / 270mm bush hammer plate
- Rollers: 6 rollers, each with 45 tips. Roller Size: 45 diameter, 39mm long
- Functions 1.Creates anti-slip finish on granite and marble 2.Remove hard coatings and overlays 3.Surface prep for coatings 4.Quickly expose large aggregate 5.Increase concrete bonding effectiveness
- Fit With SASE PDG 8000, HTC 800, HTC900, HTC1500
- Shipment: 1-3 handing days, normally receive in 10-15 days after placing order
Operation Warning
- Working Speed under 1000 RPM.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: We will dispatch all items in 2 business days from China warehouse, normally receive in 10-15 days after placing order.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
240mm/9.5 Inch Lichi Roller Bush Hammer Plate For Diamatic Grinder (ABDIA023-240mm)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
- 9.5 Inch/240mm bush hammer plate for husqvarna grinder
- Roller：3*45tips Lichi roller, 45mm diameter, 39mm long
- Functions 1.Creates anti-slip finish on granite and marble 2.Remove hard coatings and overlays 3.Surface prep for coatings 4.Quickly expose large aggregate 5.Increase concrete bonding effectiveness
- N.W: 4.13kg
- Shipment: ship in 2 business days, normally receive in 10-15 days after placing order
Operation Warning
- Working Speed under 1000 RPM.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: We will dispatch all items in 2 business days from China warehouse, normally receive in 10-15 days after placing order.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
HTC 270mm bush hammer with 3*45 pins rollers (ABHTC019-270mm)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
- 10 5/8 inch / 270mm bush hammer plate for HTC grinder
- Fit With SASE PDG 8000, HTC 800, HTC900, HTC1500
- Rollers: 3 rollers, each with 45 tips. Roller Size: 45 diameter, 39mm long
- Functions 1.Creates anti-slip finish on granite and marble 2.Remove hard coatings and overlays 3.Surface prep for coatings 4.Quickly expose large aggregate 5.Increase concrete bonding effectiveness
- Shipment: 2-3 handing days', normally receive in 10-15 days after placing order
Operation Warning
- Working Speed under 1000 RPM.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: We will dispatch all items in 2 business days from China warehouse, normally receive in 10-15 days after placing order.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
Klindex 240mm /9.5 inch Bush Hammer Plate (ABKLD024-240mm)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
- 9.5 Inch/240mm bush hammer plate for Klindex grinder
- Roller：3*45tips Lichi roller, 45mm diameter, 39mm long
- Functions 1.Creates anti-slip finish on granite and marble 2.Remove hard coatings and overlays 3.Surface prep for coatings 4.Quickly expose large aggregate 5.Increase concrete bonding effectiveness
- N.W: 4.35kg
- Shipment: ship in 2 business days, normally receive in 10-15 days after placing order.
Operation Warning
- Working Speed under 1000 RPM.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: We will dispatch all items in 2 business days from China warehouse, normally receive in 10-15 days after placing order.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
M6 threaded trapezoid bush hammer grinding shoes, bush hammer replacement roller (ABR004)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- Only for one phase grinder, not suggested for three phase machine
- Teeth Qty: 30 tips
- Pack of 3 pieces
- Qualified bearing guranteed
- Durable Cone shape carbide teeth
- Increase bonding effectiveness by preparing the concrete with CSP 4-5 roughness before the application of high build coating and overlays.
- Expose large aggregate quickly for concrete preparation.
- Fit with CPS, Sase , XPS floor grinder.
Shipping And Return
Fast Shipping: We ship from China warehouse by DHL, Fedex and etc. Customers normally receive in 10-15 days.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
Husqvarna 270mm/11 Inch 45 Tips Lichi Roller Bush Hammer Plate (ABHUS022-270mm)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
Operation Warning
- Working Speed under 1000 RPM.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: We will dispatch all items in 2 business days from China warehouse, normally receive in 10-15 days after placing order.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
3 Inch Speed Shift Bush Hammer Grinding Puck For Terrco Floor Grinder ( Pack of 3) (AGP-TER-009)
This is a customized product, we produce after customers place order, receive in 15 days after placing order.
1. Diamond bush hammer grinding puck fit with Terrco floor grinder
2. 45Tips bush hammer roller for long life grinding.
3. Hand welded tungsten tips for long life and aggressive grinding.
4. This is a customized product, we place after customer place order.
5. Deliver by DHL, UPS or Fedex, receive in 15 days after placing order.
6. Pack of 9 pcs.
7. Discount for bulk order, please feel free to reach out via email or whatsapp. We would be happy to discuss the details and tailor a discount package that suits your needs.
Warning
We do not accept returns without quality issues，our products are custom-made and cannot be canceled once ordered. If there are quality problems, please provide pictures or videos as proof, and we will arrange a refund
30 teeth bush hammer replacement roller (ABR012)
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- Replacement roller for 5 inch bush hammer plate sold in ACTINTOOL store
- Teeth Qty: 30 tips. Roller Szie: 22mm long, 34mm diamater
- Pack of 3 pieces, bolts included in package.
- Roller installed with holder
- Durable cone shape carbide teeth
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on speed adjustable angle grinder, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
HTC 230mm/9 Inch Lichi Roller Bush Hammer Plate (ABHTC021-230mm)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
- 9 inch bush hammer plate for HTC three phase grinder
- Roller: 3*45 pins roller, 45mm diameter, 39mm long.
- Functions 1.Creates anti-slip finish on granite and marble 2.Remove hard coatings and overlays 3.Surface prep for coatings 4.Quickly expose large aggregate 5.Increase concrete bonding effectiveness
- N.W 4.12 kg
- Shipment: 2-5 days' handing time, normally receive in 15 days after placing order.
Operation Warning
- Working Speed under 1000 RPM.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: We will dispatch all items in 2 business days from China warehouse, normally receive in 10-15 days after placing order.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
5 7/8 Inch SDS Plus shank 4 carbide tip bushing bit, sds bush hammer bit, bushing tool for rotary hammer (ABBT008)
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
Warning
This is a SDS plus 10mm shank bush hammer bit, not 18mm SDS max shank.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- Best for tuckpointing preparation, to rough the old mortar joints to increase the bonding effectiveness for new filling
- SDS Plus 3/8"(10mm) diameter shank bushing tool.
- 5 7/8 inch overall length
- Fit with SDS Plus rotary hammer drill
- Chrome Steel overall shank
- Stocked in us, receive in 5 days after placing order.
Warning
This is a SDS plus 10mm shank bush hammer bit, not 18mm SDS max shank.
Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
5 5/8 Inch SDS Plus shank 16 carbide tip bushing bit, sds bush hammer bit, bushing tool for rotary hammer (ABBT006)
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
This is a SDS plus 10mm shank bush hammer bit, not 18mm SDS max shank.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- SDS Plus 3/8"(10mm) diameter shank bushing tool
- Chrome Steel overall shank and durable carbide tips
- 5 5/8 inch overall length, 1-1/4*1-1/4 inch square head
- Fit with SDS Plus rotary hammer drill
- Warning: this is not a 18MM SDS max shank tool
- Stocked in us, receive in 5 days after placing order.
This is a SDS plus 10mm shank bush hammer bit, not 18mm SDS max shank.
Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
8 1/4 Inch SDS max shank welded 16 carbide teeth bushing tool, sdd bush hammer bit (ABB002)
•Chrome Steel overall shank and durable carbide tips
•Pack of 1
•8 1/4 inch overall length, 1 1/4*1 1/4 inch square head
•Demolition bushing hammer bit for concrete
•Stocked in us, receive in 5 days after placing order.
Warning
This is a SDS Max 18mm shank bush hammer bit, not 10mm SDS Plus shank.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query
•SDS max 18mm diameter shank bushing to•Chrome Steel overall shank and durable carbide tips
•Pack of 1
•8 1/4 inch overall length, 1 1/4*1 1/4 inch square head
•Demolition bushing hammer bit for concrete
•Stocked in us, receive in 5 days after placing order.
Warning
This is a SDS Max 18mm shank bush hammer bit, not 10mm SDS Plus shank.
Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
45 tips bush hammer replacement roller (ABR020)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
- Bush hammer replacement roller for Frankfurt, HTC, New Grind Rhino and Husqvarna grinder. Suitable for powerful three phase grinder.
- Teeth Qty: 45 tips. Roller 5.3cm Long, 4.9cm diameter
- Pack of 3 pieces roller only.
- Roller only, the holder not included
- Durable cone shape carbide teeth.
Shipping And Return
Fast Shipping: We ship from China warehouse by DHL, Fedex and etc in 2 business days. Normally receive in 10-15 days after placing order.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
11 3/4 Inch SDS max shank 25 carbide tips bushing tool, sds max bushing hammer drill bit (ABB004)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- SDS max 18mm diameter shank bushing tool
- Chrome Steel overall shank and durable carbide tips
- 25 tips works more agressive than 16 tips
- 11 3/4 inch overall length, 1 1/2*1 1/2 inch square head
- Demolition bushing hammer bit for concrete
- Stocked in us, receive in 5 days after placing order.
Warning
This is a SDS Max 18mm shank bush hammer bit, not 10mm SDS Plus shank.Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
14 Inch handheld bushing tool for concrete stone surface, handheld bushing bit bushing hammer tool (ABB005)
• Creating rough CSP 5 similar finish on concrete and stone surface.
• 16*16 durable carbide tips head bushing tool
• Head Size: 1.9*1.9*5 3/8 inch
• High quality durable rubber hand
• N.W: 1.72 KG, about 3.8 ibs heavy hammer
• Stocked in us, receive in 5 days after placing order.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
• 14 inch handheld bush hammer tool• Creating rough CSP 5 similar finish on concrete and stone surface.
• 16*16 durable carbide tips head bushing tool
• Head Size: 1.9*1.9*5 3/8 inch
• High quality durable rubber hand
• N.W: 1.72 KG, about 3.8 ibs heavy hammer
• Stocked in us, receive in 5 days after placing order.
Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
- 1