Buscar
Criterios de Búsqueda
Productos que cumplen las condiciones de búsqueda
5 inch 15Tips roller coarser finish bush hammer plate (ABH018-125MM)
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- Functions: 1. Creates anti-slip finish on granite and marble 2. Remove hard coatings and overlays 3. Surface prep for coatings 4. Quickly expose large aggregate 5. Increase concrete bonding effectiveness
- Adapt To Low Speed Polisher: Makita 9227CB/ 9237CB is suggested with speed adjustable. Do not recommend to operate with speed too high, ideally less than 1000 RPM.
- Best for granite and marble floor texturing, create antislip finish on stone surface
- Size: 5 inch double plates
- Roller: 3*15 Tips rollers, creates CSP 6 finish on concrete.
- Single 5 inch plate also available in actintool store
- Contact seller to buy replacement roller
- The bearing is wear item, please replace the broken one. Check the instruction in this website: replace bearing instruction.
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on low speed polisher, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
6 inch 15Tips roller coarser finish bush hammer plate, handheld concrete scarifier (ABH019-150MM)
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- Functions: 1. Creates anti-slip finish on granite and marble 2. Remove hard coatings and overlays 3. Surface prep for coatings 4. Quickly expose large aggregate 5. Increase concrete bonding effectiveness
- Adapt To Low Speed Polisher: Makita 9227CB/ 9237CB is suggested with speed adjustable. Do not recommend to operate with speed too high, ideally less than 1000 RPM.
- Best for granite and marble floor texturing, create antislip finish on stone surface
- Size: one 5 inch plate and one 6 inch plate.
- Roller: 4*15 Tips rollers, creates CSP 6 finish on concrete.
- Single 5 inch plate also available in actintool store
- Contact seller to buy replacement roller
- The bearing is wear item, please replace the broken one. Check the instruction in this website: replace bearing instruction.
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on low speed polisher, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
Placa de abujardadora de rodillo Lichi de 240 mm/9,5 pulgadas para amoladora diamática (ABDIA023-240mm)
Devoluciones: Si su artículo está defectuoso o le hemos enviado algo diferente a lo que pidió, devuélvalo en el embalaje original dentro de los 30 días y le daremos un reemplazo o un reembolso parcial con el costo de envío deducido.
Seguridad de pago: Todas las transacciones están protegidas por SSL y se garantiza su seguridad.
Su privacidad: Nunca compartiremos su información con nadie.
- Placa de abujardado de 9,5 pulgadas/240 mm para amoladora Husqvarna
- Rodillo: rodillo Lichi de 3*45 puntas, 45 mm de diámetro, 39 mm de largo
- Funciones 1.Crea un acabado antideslizante en granito y mármol 2.Elimina revestimientos duros y superposiciones 3.Preparación de superficies para revestimientos 4.Expone rápidamente agregados grandes 5.Aumenta la efectividad de la unión del concreto
- NO: 4,13 kg
- Envío: envíe en 2 días hábiles, normalmente reciba entre 10 y 15 días después de realizar el pedido
Advertencia de operación
- Velocidad de trabajo inferior a 1000 RPM.
- No aplique demasiada presión sobre el abujardador. Esto evitará que el rodillo se detenga y, por lo tanto, disminuirá la vida útil de las puntas de carburo.
- Después de cada uso, limpie los rodillos, séquelos y aplique aceite a los ejes. Lo ideal será sumergir los rodillos en aceite para evitar la oxidación del husillo. Las puntas de los rodillos se pueden revestir con discos de diamante cuando se vuelvan ineficaces.
Envío y devolución
Envío rápido: enviaremos todos los artículos en 2 días hábiles desde el almacén de China, normalmente los recibiremos entre 10 y 15 días después de realizar el pedido.Devoluciones: Si su artículo está defectuoso o le hemos enviado algo diferente a lo que pidió, devuélvalo en el embalaje original dentro de los 30 días y le daremos un reemplazo o un reembolso parcial con el costo de envío deducido.
Seguridad de pago: Todas las transacciones están protegidas por SSL y se garantiza su seguridad.
Su privacidad: Nunca compartiremos su información con nadie.
Martillo de bujarda HTC de 270 mm con rodillos de 3*45 pines (ABHTC019-270mm)
Devoluciones: Si su artículo está defectuoso o le hemos enviado algo diferente a lo que pidió, devuélvalo en el embalaje original dentro de los 30 días y le daremos un reemplazo o un reembolso parcial con el costo de envío deducido.
Seguridad de pago: Todas las transacciones están protegidas por SSL y se garantiza su seguridad.
Su privacidad: Nunca compartiremos su información con nadie.
- Placa de abujardado de 10 5/8 pulgadas/270 mm para amoladora HTC
- Compatible con SASE PDG 8000, HTC 800, HTC900, HTC1500.
- Rodillos: 3 rodillos, cada uno con 45 puntas. Tamaño del rodillo: 45 de diámetro, 39 mm de largo.
- Funciones 1.Crea un acabado antideslizante en granito y mármol 2.Elimina revestimientos duros y superposiciones 3.Preparación de la superficie para revestimientos 4.Expone rápidamente agregados grandes 5.Aumenta la efectividad de la unión del concreto
- Envío: 2-3 días hábiles, normalmente se recibe en 10-15 días después de realizar el pedido
Advertencia de operación
- Velocidad de trabajo inferior a 1000 RPM.
- No aplique demasiada presión sobre el abujardador. Esto evitará que el rodillo se detenga y, por lo tanto, disminuirá la vida útil de las puntas de carburo.
- Después de cada uso, limpie los rodillos, séquelos y aplique aceite a los ejes. Lo ideal será sumergir los rodillos en aceite para evitar la oxidación del husillo. Las puntas de los rodillos se pueden revestir con discos de diamante cuando se vuelvan ineficientes.
Envío y devolución
Envío rápido: enviaremos todos los artículos en 2 días hábiles desde el almacén de China, normalmente los recibiremos entre 10 y 15 días después de realizar el pedido.Devoluciones: Si su artículo está defectuoso o le hemos enviado algo diferente a lo que pidió, devuélvalo en el embalaje original dentro de los 30 días y le daremos un reemplazo o un reembolso parcial con el costo de envío deducido.
Seguridad de pago: Todas las transacciones están protegidas por SSL y se garantiza su seguridad.
Su privacidad: Nunca compartiremos su información con nadie.
Placa de abujardado Klindex de 240 mm / 9,5 pulgadas (ABKLD024-240mm)
Devoluciones: Si su artículo está defectuoso o le hemos enviado algo diferente a lo que pidió, devuélvalo en el embalaje original dentro de los 30 días y le daremos un reemplazo o un reembolso parcial con el costo de envío deducido.
Seguridad de pago: Todas las transacciones están protegidas por SSL y se garantiza su seguridad.
Su privacidad: Nunca compartiremos su información con nadie.
1####1amp; visitId=30af712a-d1c5-4d82-a129-a019b03a803e" target="_blank" rel="noopener">
- Placa de abujardado de 9,5 pulgadas/240 mm para amoladora Klindex
- Rodillo: rodillo Lichi de 3*45 puntas, 45 mm de diámetro, 39 mm de largo
- Funciones 1.Crea un acabado antideslizante en granito y mármol 2.Elimina revestimientos duros y superposiciones 3.Preparación de superficies para revestimientos 4.Expone rápidamente agregados grandes 5.Aumenta la efectividad de la unión del concreto
- NO: 4,35 kg
- Envío: envíe en 2 días hábiles, normalmente reciba entre 10 y 15 días después de realizar el pedido.
Advertencia de operación
- Velocidad de trabajo inferior a 1000 RPM.
- No aplique demasiada presión sobre el abujardador. Esto evitará que el rodillo se detenga y, por lo tanto, disminuirá la vida útil de las puntas de carburo.
- Después de cada uso, limpie los rodillos, séquelos y aplique aceite a los ejes. Lo ideal será sumergir los rodillos en aceite para evitar la oxidación del husillo. Las puntas de los rodillos se pueden revestir con discos de diamante cuando se vuelvan ineficientes.
Envío y devolución
Envío rápido: enviaremos todos los artículos en 2 días hábiles desde el almacén de China, normalmente los recibiremos entre 10 y 15 días después de realizar el pedido.Devoluciones: Si su artículo está defectuoso o le hemos enviado algo diferente a lo que pidió, devuélvalo en el embalaje original dentro de los 30 días y le daremos un reemplazo o un reembolso parcial con el costo de envío deducido.
Seguridad de pago: Todas las transacciones están protegidas por SSL y se garantiza su seguridad.
Su privacidad: Nunca compartiremos su información con nadie.
Husqvarna 270mm/11Inch Knurling Roller Bush Hammer Plate (ABHUS022-SB270mm)
For wholesale price, please send email to judy@actintool.com.
Item No. | ABHUS022-SB270mm |
Product Size | 270mm Diameter |
Segment Size/Qty | n/a |
Roller Qty | 3 pcs |
Arbor Size | N/A |
Finish | Sandblasting |
N.W&G.W | 6.2 /6.5 kg |
Usage | Concrete and stone |
Euipment | Husqvarna |
Package | 1 pcs |
Delivery Time | 2-7 days after receiving payment |
Package | Brown/White carton or customized |
Payment Method | T/T, Paypal, Western Union |
Shipping | DHL, FEDEX, TNT, UPS etc. |
Customer Service | Please send email to judy@actintool.com |
HTC 230mm/9 Inch Knurling Roller Bush Hammer Plate (ABHTC021-SB230mm)
For wholesale price, please send email to judy@actintool.com.
Item No. | ABHTC021-SB230mm |
Product Size | 230mm /9 Inch Diameter |
Segment Size/Qty | n/a |
Roller Qty | 3 pcs |
Arbor Size | N/A |
Finish | Sandblasting |
N.W&G.W | 4.2 /4.5 kg |
Usage | Concrete and stone |
Euipment | HTC |
Package | 1 pcs |
Delivery Time | 2-7 days after receiving payment |
Package | Brown/White carton or customized |
Payment Method | T/T, Paypal, Western Union |
Shipping | DHL, FEDEX, TNT, UPS etc. |
Customer Service | Please send email to judy@actintool.com |
Husqvarna 270mm/11Inch Vacuum Brazed Coarse Roller Bush Hammer Plate (ABHUS022-VBC270mm)
For wholesale price, please send email to judy@actintool.com.
Item No. | ABHUS022-VBC270mm |
Product Size | 270mm /11 Inch Diameter |
Segment Size/Qty | n/a |
Roller Qty | 3 pcs |
Arbor Size | N/A |
Finish | Vacuum Brazed |
N.W&G.W | 6.2 /6.5 kg |
Usage | Concrete and stone |
Euipment | Husqvarna |
Package | 1 pcs |
Delivery Time | 2-7 days after receiving payment |
Package | Brown/White carton or customized |
Payment Method | T/T, Paypal, Western Union |
Shipping | DHL, FEDEX, TNT, UPS etc. |
Customer Service | Please send email to judy@actintool.com |
HTC 230mm/9 Inch Vacuum Brazed Coarse Roller Bush Hammer Plate (ABHTC021-VBC230mm)
For wholesale price, please send email to judy@actintool.com.
Item No. | ABHTC021-VBC230mm |
Product Size | 230mm /9 Inch Diameter |
Segment Size/Qty | n/a |
Roller Qty | 3 pcs |
Arbor Size | N/A |
Finish | Vacuum Brazed |
N.W&G.W | 4.2 /4.5 kg |
Usage | Concrete and stone |
Euipment | HTC |
Package | 1 pcs |
Delivery Time | 2-7 days after receiving payment |
Package | Brown/White carton or customized |
Payment Method | T/T, Paypal, Western Union |
Shipping | DHL, FEDEX, TNT, UPS etc. |
Customer Service | Please send email to judy@actintool.com |
- 1