Search
Search Criteria
Products meeting the search criteria
5 inch/125mm 30Tips double layer diamond bush hammer tool, plato de bujarda for concrete and stone floor (ABH001-125mm)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- Wide Use: For marble, granite and concrete floor grinding and texturing 1. Creates anti-slip finish on granite and marble 2. Remove hard coatings and overlays 3. Surface prep for coatings 4. Quickly expose large aggregate 5. Increase concrete bonding effectiveness
- Adapt To Low Speed Polisher: Makita 9227CB/ 9237CB speed adjustable polisher is suggested for the bush hammer tool. Do not recommend to operate with speed too high, ideally less than 1000 RPM.
- Size: 5 inch double plates, about 4.3 inch high
- Lichi Rollers: 3 rollers, Each roller with 30 pins, coarse lichi finish on surface.
- Replacement Roller and SDS Shank Bush Hammer Available In ACTINTOOL Store
- 6 inch bush hammer plate with 4 rollers is also available in Actintool store
- The bearing is wear item, please replace the broken one. Check the instruction in this website: replace bearing instruction.
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on speed adjustable polisher, such as makita9227CB/ 9237CB polisher, suggested speed less than 1000 RPM. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
6 inch/150mm plate 30Tips lichi finish diamond bush hammer tool for angle grinder (ABH002-150mm)
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- Wide Use: 1.Creates anti-slip finish on granite and marble 2.Remove hard coatings and overlays 3.Surface prep for coatings 4.Quickly expose large aggregate 5.Increase concrete bonding effectiveness
- Adapt To Low Speed Polisher: Makita 9227CB/ 9237CB speed adjustable polisher is suggested for the bush hammer tool. Do not recommend to operate with speed too high, ideally less than 1000 RPM.
- Size: double layer plates, two plates in different size, one 6 inch, the other one 5 inch.
- Roller : 4 rollers, each roller with 30 tips.
- Floor coating removing and surface texturing
- The bearing is wear item, please replace the broken one. Check the instruction in this website: replace bearing instruction.
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on speed adjustable polisher, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
5 inch 15Tips roller coarser finish bush hammer plate (ABH018-125MM)
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- Functions: 1. Creates anti-slip finish on granite and marble 2. Remove hard coatings and overlays 3. Surface prep for coatings 4. Quickly expose large aggregate 5. Increase concrete bonding effectiveness
- Adapt To Low Speed Polisher: Makita 9227CB/ 9237CB is suggested with speed adjustable. Do not recommend to operate with speed too high, ideally less than 1000 RPM.
- Best for granite and marble floor texturing, create antislip finish on stone surface
- Size: 5 inch double plates
- Roller: 3*15 Tips rollers, creates CSP 6 finish on concrete.
- Single 5 inch plate also available in actintool store
- Contact seller to buy replacement roller
- The bearing is wear item, please replace the broken one. Check the instruction in this website: replace bearing instruction.
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on low speed polisher, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
6 inch 15Tips roller coarser finish bush hammer plate (ABH019-150MM)
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- Functions: 1. Creates anti-slip finish on granite and marble 2. Remove hard coatings and overlays 3. Surface prep for coatings 4. Quickly expose large aggregate 5. Increase concrete bonding effectiveness
- Adapt To Low Speed Polisher: Makita 9227CB/ 9237CB is suggested with speed adjustable. Do not recommend to operate with speed too high, ideally less than 1000 RPM.
- Best for granite and marble floor texturing, create antislip finish on stone surface
- Size: one 5 inch plate and one 6 inch plate.
- Roller: 4*15 Tips rollers, creates CSP 6 finish on concrete.
- Single 5 inch plate also available in actintool store
- Contact seller to buy replacement roller
- The bearing is wear item, please replace the broken one. Check the instruction in this website: replace bearing instruction.
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on low speed polisher, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
5 Inch/125mm double plates tungsten roller sandblasting finish bush hammer tool (ABT006-125mm)
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- 5 inch single plate sandbasting bush hammer tool for angle grinder or polisher
- Create fine sandblasting finish on stone and concrete surface, mostly used on bathroom floor, stairs for antislip purpose.
- Fit with low speed polisher, suggested RPM less than 1000 RPM. It is dangerous to operate in high speed that cause the damage of roller.
- Super hard tungsten roller with 312 small tips to create fine finish on stone surface
- 3 knurling type rollers installed on a 5 inch plate
- Check actintool store for other coarse finish bush hammer tools
- N.W about 3.7 ibs
- Ship from China warehouse, 1-3 handling days, receive in 5-10 days.
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on speed adjustable polisher, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: For products not stocked in Us, Ship from China Warehouse in 2 days, normally receive in 5-10 days.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
5 inch single plate 30 tips bush hammer plate, bushing hammer tool concrete (ABSDS026-125M)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- 【Fit with low speed polisher】This 5 inch single plate bush hammer can fit with low speed polisher
- 【Agressive Cobalt Teeth】3 pcs rollers on a 5 inch plate, each roller is welded with 30 teeth.
- 【Wide Use】1.Remove laminated concrete, failing overlayments and underlayments 2. Create antislip finish on stone and concrete surface 3. Create 4-5 CSP roughness and increase concrete bonding effectiveness before new coating 4. Expose aggregate quickly for concrete surface preparation.
- 【Size】5 inch plate
- 【Operation Tips】Working speed under 1000 RPM, do not operate with too much pressure, which can stop the roller from running . Rollers is also sold separately in actintool store, you can buy to replace the worned one.
- The bearing is wear item, please replace the broken one. Check the instruction in this website: replace bearing instruction.
Operation Warning
- Working Speed under 1000 RPM. Not recommended for high rpm angle grinder, suggested to install bush hammer on speed adjustable polisher, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
5 inch/125mm plate tungsten star roller diamond bush hammer tool (ABT003-125mm)
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- Functions: 1. Creates anti-slip finish on granite and marble 2. Remove hard coatings and overlays 3. Surface prep for coatings 4. Quickly expose large aggregate 5. Increase concrete bonding effectiveness
- Adapt To Low Speed Polisher: Makita 9227CB/ 9237CB is suggested with speed adjustable. Do not recommend to operate with speed too high, ideally less than 1000 RPM.
- Best for granite and marble floor texturing, create antislip finish on stone surface
- Size: 5 inch double plates
- Roller: 3 rollers, each roller with 2 pcs star blade, one blade with 10 teeth.
- Single 5 inch plate also available in actintool store
- Contact seller to buy replacement roller
- The bearing is wear item, please replace the broken one. Check the instruction in this website: replace bearing instruction.
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on low speed polisher, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
SDS max shank 5 inch plate 30 tips bush hammer plate, sds max bushing bit (ABSDS027-125M)
Warning
This is a SDS Max 18mm shank bush hammer bit, not 10mm SDS Plus shank.
Fitting with rotary hammer, it only works in rotary mode and can create less deeper finish on stone and concrete. To dig deeper, please fit the bush hammer tool with low speed polisher, more pressure and low speed ( less than 1000 RPM) can make it more aggressive.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- 【Fit with rotary hammer and low speed polisher】This 5 inch bush hammer plate is packed with a 5/8"-11 to SDS Max shank adapter, can fit with rotary hammer or demolition hammer. Taking away the adapter, the bush hammer plate can fit with 5/8"-11 threaded polisher.
- 【Agressive Cobalt Teeth】3 pcs rollers on a 5 inch plate, each roller is welded with 30 teeth.
- 【Wide Use】1.Remove laminated concrete and other heavy coating 2. Create antislip finish on surface 3. Increase concrete bonding effectiveness before new coating
- 【Size】5 inch plate, 9 inch long with shank.
- 【Operation Tips】Rotaion mode only, no impact mode, which can twist the adapter shank.Working speed under 1000 RPM, do not operate with too much pressure, which can stop the roller from running and break the shank. Rollers and shank are sold separately in actintool store, you can buy to replace the worned parts.
- Stocked in us, receive in 5 days after placing order.
- The bearing is wear item, please replace the broken one. Check the instruction in this website: replace bearing instruction.
Warning
This is a SDS Max 18mm shank bush hammer bit, not 10mm SDS Plus shank.
Fitting with rotary hammer, it only works in rotary mode and can create less deeper finish on stone and concrete. To dig deeper, please fit the bush hammer tool with low speed polisher, more pressure and low speed ( less than 1000 RPM) can make it more aggressive.
Shipping And Return
Fast Shipping: For US Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
5 inch /125mm single plate star tungsten roller bush hammer for angle grinder (ABT005-125MM)
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- 5 inch single plate star roller bush hammer tool for low speed polisher.
- Create fine pointed finish on stone and concrete surface, mostly used on bathroom floor, stairs for antislip purpose.
- Fit with speed adjustable angle grinder or polisher, suggested RPM less than 1000 RPM
- Hard tungsten roller with 10 tips to create fine finish on stone and concrete surface
- 3 star type rollers installed on a 5 inch plate
- Check actintool store for other coarse finish bush hammer tools
- N.W about 3.7 ibs
- Ship from China warehouse, 1-3 handling days, receive in 5-10 days.
- The bearing is wear item, please replace the broken one. Check the instruction in this website: replace bearing instruction.
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on speed adjustable polisher, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
- Fast Shipping: For products not stocked in Us, Ship from China Warehouse in 2 days, normally receive in 5-10 days.
- Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
- Payment Safety: All transactions are SSL-protected and guaranteed safe
- Your Privacy: We will never share your information with anyone.
5 inch/125mm knurling tungsten roller sandblasting finish bush hammer tool (ABT004-125mm)
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- 5 inch single plate sandbasting bush hammer tool for low speed polisher
- Create fine sandblasting finish on stone and concrete surface, mostly used on bathroom floor, stairs for antislip purpose.
- Fit with speed low speed polisher, suggested RPM less than 1000 RPM
- Super hard tungsten roller with 312 small tips to create fine finish on stone surface
- 3 knurling type rollers installed on a 5 inch plate
- Check actintool store for other coarse finish bush hammer tools
- N.W about 3.7 ibs
- Ship from China warehouse, 1-3 handling days, receive in 5-10 days.
- The bearing is wear item, please replace the broken one. Check the instruction in this website: replace bearing instruction.
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on speed adjustable polisher, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: For products not stocked in Us, Ship from China Warehouse in 2 days, normally receive in 5-10 days.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
6 inch/150mm tungsten sandblasting finish bush hammer plate for concrete and stone floor grinding (ABT001-150mm)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- 6 inch single plate sandbasting bush hammer tool for angle grinder or polisher
- Create fine sandblasting finish on stone and concrete surface, mostly used on bathroom floor, stairs for antislip purpose.
- Fit with speed adjustable angle grinder or polisher, suggested RPM less than 1000 RPM
- Super hard tungsten roller with 312 small tips to create fine finish on stone surface
- 4 knurling type rollers installed on a 5 inch plate
- Check actintool store for other coarse finish bush hammer tools
- N.W about 5 ibs
- Ship from China warehouse, 1-3 handling days, receive in 5-10 days.
- The bearing is wear item, please replace the broken one. Check the instruction in this website: replace bearing instruction.
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on speed adjustable polisher, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: For products not stocked in Us, Ship from China Warehouse in 2 days, normally receive in 5-10 days.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
6 Inch /150mm tungsten bush hammer plate with 4 star type rollers (ABT002-150mm)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- 6 inch single plate star bush hammer tool for low speed polisher.
- Create fine pointed finish on stone and concrete surface, mostly used on bathroom floor, stairs for antislip purpose.
- Fit with low speed polisher, suggested RPM less than 1000 RPM
- Hard tungsten star shape roller with 10 small tips to create fine finish on stone surface
- 4 star type rollers installed on a 5 inch plate
- Check actintool store for other coarse finish bush hammer tools
- N.W about 4.8 ibs
- Ship from China warehouse, 1-3 handling days, receive in 5-10 days.
- The bearing is wear item, please replace the broken one. Check the instruction in this website: replace bearing instruction.
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on speed adjustable polisher, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: For products not stocked in Us, Ship from China Warehouse in 2 days, normally receive in 5-10 days.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
HTC 270mm bush hammer with 6*45 pins rollers (ABHTC019-270mm)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
- 10 5/8 inch / 270mm bush hammer plate
- Rollers: 6 rollers, each with 45 tips. Roller Size: 45 diameter, 39mm long
- Functions 1.Creates anti-slip finish on granite and marble 2.Remove hard coatings and overlays 3.Surface prep for coatings 4.Quickly expose large aggregate 5.Increase concrete bonding effectiveness
- Fit With SASE PDG 8000, HTC 800, HTC900, HTC1500
- Shipment: 1-3 handing days, normally receive in 10-15 days after placing order
Operation Warning
- Working Speed under 1000 RPM.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: We will dispatch all items in 2 business days from China warehouse, normally receive in 10-15 days after placing order.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
8 Inch/200mm diamond bush hammer Martelinas plate with 4 rollers for concrete floor (ABH003-200mm)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
- Designed for hand polishing machine, used to make bush hammered profile on stone and concrete surface.
- Size: 8 inch plate. Double layer plates
- Roller Qty: 4; Pin Qty: 45 pins
- The connector is packed inside
- Cone shape carbide teeth
- For stone and concrete surface texturing
- Ship from China wareshouse in 1-3 days by UPS, DHL, or Fedex, normally receive in 10-15 days after placing order.
Operation Warning
- Working Speed under 1000 RPM.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: This product stocked in China warehouse, we ship from China warehouse by DHL, Fedex and etc. Normally receive in 10-15 adays after placing orderReturns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
Redi lock 30 cone carbide teeth bush hammer roller head for Husqvarna grinder (ABR005)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- Bush hammer replacement roller HUS grinder. Suitable for one phase grinder.
- Teeth Qty: 30 tips.
- Pack of 3 pieces, bolts included in package.
- Roller installed with holder
- Durable cone shape carbide teeth
- Only high quality bearing from trusted supplier are used in the roller, but the bearing is still wear item, please replace the broken one when necessary.
- Create CSP 4 finish on concrete surface, to increase the bonding effectiveness and expose aggregate quickly for concrete surface preparation.
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on speed adjustable angle grinder, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
240mm/9.5 Inch Lichi Roller Bush Hammer Plate For Diamatic Grinder (ABDIA023-240mm)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
- 9.5 Inch/240mm bush hammer plate for husqvarna grinder
- Roller：3*45tips Lichi roller, 45mm diameter, 39mm long
- Functions 1.Creates anti-slip finish on granite and marble 2.Remove hard coatings and overlays 3.Surface prep for coatings 4.Quickly expose large aggregate 5.Increase concrete bonding effectiveness
- N.W: 4.13kg
- Shipment: ship in 2 business days, normally receive in 10-15 days after placing order
Operation Warning
- Working Speed under 1000 RPM.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: We will dispatch all items in 2 business days from China warehouse, normally receive in 10-15 days after placing order.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
Trapezoid bush hammer grinding disc for SASE grinder (ABR036)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- Only for one phase grinder, not suggested for three phase machine
- Teeth Qty: 30 tips
- Pack of 3 pieces
- Qualified bearing guranteed
- Durable Cone shape carbide teeth
- Fit with SASE quick change floor grinder
- Increase bonding effectiveness by preparing the concrete with CSP 4-5 roughness before the application of high build coating and overlays.
- Expose large aggregate quickly for concrete preparation.
Shipping And Return
Fast Shipping: We ship from China warehouse by DHL, Fedex and etc. Customers normally receive in 10-15-10 days.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
Trapezoid bush hammer grinding shoes for STI grinder (ABR035)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- Only for one phase grinder, not suggested for three phase machine
- Teeth Qty: 30 tips
- Pack of 3 pieces
- Qualified bearing guranteed
- Durable Cone shape carbide teeth
- FIt with STI one phase floor grinder
- Increase bonding effectiveness by preparing the concrete with CSP 4-5 roughness before the application of high build coating and overlays.
- Expose large aggregate quickly for concrete preparation.
Shipping And Return
Fast Shipping: We ship from China warehouse by DHL, Fedex and etc. Customers normally receive in 10-15 days.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
trapezoid bush hammer grinding shoes for Lavina grinder ( Pack of 3) (ABR003)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- Only for one phase grinder, not suggested for three phase machine
- Teeth Qty: 30 tips
- Pack of 3 pieces
- Only high quality bearing from trusted supplier are used in the roller, but the bearing is wear item, please replace the broken one when necessary. Please check the bearing replacement instruction here.
- Create CSP 4 finish on concrete surface, to increase the bonding effectiveness and expose aggregate quickly for concrete surface preparation.
Shipping And Return
Fast Shipping: We ship from US warehouse in 2 days. Customer can receive in 5 days.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
9MM non threaded hole 30 cone carbides trapezoid bush hammer grinding shoes for ASL grinder (ABR002)
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- Only for one phase grinder, not suggested for three phase machine
- Teeth Qty: 30 tips
- Pack of 3 pieces
- Qualified bearing guranteed
- Durable Cone shape carbide teeth
- Fit with ASL, Iron Horse, Warrior floor grinder
- Increase bonding effectiveness by preparing the concrete with CSP 4-5 roughness before the application of high build coating and overlays.
- Expose large aggregate quickly for concrete preparation.
Shipping And Return
Fast Shipping: We ship from China warehouse by DHL, Fedex and etc. Customers normally receive in 10-15 days.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
HTC 270mm bush hammer with 3*45 pins rollers (ABHTC019-270mm)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
- 10 5/8 inch / 270mm bush hammer plate for HTC grinder
- Fit With SASE PDG 8000, HTC 800, HTC900, HTC1500
- Rollers: 3 rollers, each with 45 tips. Roller Size: 45 diameter, 39mm long
- Functions 1.Creates anti-slip finish on granite and marble 2.Remove hard coatings and overlays 3.Surface prep for coatings 4.Quickly expose large aggregate 5.Increase concrete bonding effectiveness
- Shipment: 2-3 handing days', normally receive in 10-15 days after placing order
Operation Warning
- Working Speed under 1000 RPM.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: We will dispatch all items in 2 business days from China warehouse, normally receive in 10-15 days after placing order.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
Klindex 240mm /9.5 inch Bush Hammer Plate (ABKLD024-240mm)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
- 9.5 Inch/240mm bush hammer plate for Klindex grinder
- Roller：3*45tips Lichi roller, 45mm diameter, 39mm long
- Functions 1.Creates anti-slip finish on granite and marble 2.Remove hard coatings and overlays 3.Surface prep for coatings 4.Quickly expose large aggregate 5.Increase concrete bonding effectiveness
- N.W: 4.35kg
- Shipment: ship in 2 business days, normally receive in 10-15 days after placing order.
Operation Warning
- Working Speed under 1000 RPM.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: We will dispatch all items in 2 business days from China warehouse, normally receive in 10-15 days after placing order.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
M6 threaded trapezoid bush hammer grinding shoes, bush hammer replacement roller (ABR004)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- Only for one phase grinder, not suggested for three phase machine
- Teeth Qty: 30 tips
- Pack of 3 pieces
- Qualified bearing guranteed
- Durable Cone shape carbide teeth
- Increase bonding effectiveness by preparing the concrete with CSP 4-5 roughness before the application of high build coating and overlays.
- Expose large aggregate quickly for concrete preparation.
- Fit with CPS, Sase , XPS floor grinder.
Shipping And Return
Fast Shipping: We ship from China warehouse by DHL, Fedex and etc. Customers normally receive in 10-15 days.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
Husqvarna 270mm/11 Inch 45 Tips Lichi Roller Bush Hammer Plate (ABHUS022-270mm)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
Operation Warning
- Working Speed under 1000 RPM.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: We will dispatch all items in 2 business days from China warehouse, normally receive in 10-15 days after placing order.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
3 Inch Speed Shift Bush Hammer Grinding Puck For Terrco Floor Grinder ( Pack of 3) (AGP-TER-009)
This is a customized product, we produce after customers place order, receive in 15 days after placing order.
1. Diamond bush hammer grinding puck fit with Terrco floor grinder
2. 45Tips bush hammer roller for long life grinding.
3. Hand welded tungsten tips for long life and aggressive grinding.
4. This is a customized product, we place after customer place order.
5. Deliver by DHL, UPS or Fedex, receive in 15 days after placing order.
6. Pack of 9 pcs.
7. Discount for bulk order, please feel free to reach out via email or whatsapp. We would be happy to discuss the details and tailor a discount package that suits your needs.
Warning
We do not accept returns without quality issues，our products are custom-made and cannot be canceled once ordered. If there are quality problems, please provide pictures or videos as proof, and we will arrange a refund
Bush hammer grinidng plate for STI floor griner (ABR006)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
- Big 45 tips bush hammer roller suitable for large three phase floor grinder. Fit with STI floor grinder
- Pack of 3 pcs
- Increase bonding effectiveness by preparing the concrete with CSP 4-5 roughness before the application of high build coating and overlays.
- Expose large aggregate quickly for concrete preparation.
Shipping And Return
Fast Shipping: We ship from China warehouse by DHL, Fedex and etc. Customers normally receive in 10-15 days.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
30 teeth bush hammer replacement roller (ABR012)
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- Replacement roller for 5 inch bush hammer plate sold in ACTINTOOL store
- Teeth Qty: 30 tips. Roller Szie: 22mm long, 34mm diamater
- Pack of 3 pieces, bolts included in package.
- Roller installed with holder
- Durable cone shape carbide teeth
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on speed adjustable angle grinder, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
45 teeth tungsten cone teeth bush hammer replacement roller for Husqvarna grinder (Pack Of 3 ) (ABR014)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- Bush hammer replacement roller for Frankfurt, HTC and HUS grinder. Suitable for powerful three phase grinder.
- Teeth Qty: 45 tips. Roller 5.3cm Long, 4.9cm diameter
- Pack of 3 pieces, bolts included in package.
- Roller installed with holder
- Durable cone shape carbide teeth
Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
Husqvarna redi lock 45 cone carbides diamond bush hammer roller (ABR001)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
- Big 45 tips bush hammer roller suitable for large three phase floor grinder.
Fit with Husqvarna redi lock floor grinder - Pack of 3 pcs
- Increase bonding effectiveness by preparing the concrete with CSP 4-5 roughness before the application of high build coating and overlays.
- Expose large aggregate quickly for concrete preparation.
Shipping And Return
Fast Shipping: We ship from China warehouse by DHL, Fedex and etc. Customers normally receive in 10-15 days.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
star shape tungsten bush hammer head roller (ABR007)
Star blade bush hammer replacement roller for 5 inch star bush hammer plate.
To create similar to CSP 2 -3 anti-slip finish on concrete and stone surface.
Durable tungsten material for long life grinding.
Pack of 3 pcs
To create similar to CSP 2 -3 anti-slip finish on concrete and stone surface.
Durable tungsten material for long life grinding.
Pack of 3 pcs
Frankfurt 45 teeth bush hammer replacement block, frankfurt 45 tips bush hammer tool for automatic grinding machine ( pack of 3) (ABR011)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- Frankfurt 45 pins lichi finish bush hammer tool
- Pack of 3
- 45 teeth on each roller
- Roller 39mm long, 40mm diameter
- Durable cone shape carbide teeth
- Fit with automatic polishing machine
- For stone and concrete surface grinding
Shipping And Return
Fast Shipping: We ship from China warehouse by DHL, Fedex and etc. The estimated delivery time is 10-15 days.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
Frankfurt 60 pins Lichi Finish bush hammer tool, frankfurt bush hammer replacement block for automatic machine ( pack of 3) (ABR022)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- Frankfurt 60 pins lichi finish bush hammer tool
- Pack of 3
- 60 teeth on each roller
- Roller 54mm long, 50mm diameter
- Durable cone shape carbide teeth
- Fit with automatic polishing machine
- For stone and concrete surface grinding
Shipping And Return
Fast Shipping: We ship from China warehouse by DHL, Fedex and etc. The estimated delivery time is 10-15 days.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
HTC 230mm/9 Inch Lichi Roller Bush Hammer Plate (ABHTC021-230mm)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
- 9 inch bush hammer plate for HTC three phase grinder
- Roller: 3*45 pins roller, 45mm diameter, 39mm long.
- Functions 1.Creates anti-slip finish on granite and marble 2.Remove hard coatings and overlays 3.Surface prep for coatings 4.Quickly expose large aggregate 5.Increase concrete bonding effectiveness
- N.W 4.12 kg
- Shipment: 2-5 days' handing time, normally receive in 15 days after placing order.
Operation Warning
- Working Speed under 1000 RPM.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: We will dispatch all items in 2 business days from China warehouse, normally receive in 10-15 days after placing order.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
5 7/8 Inch SDS Plus shank 4 carbide tip bushing bit, sds bush hammer bit, bushing tool for rotary hammer (ABBT008)
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
Warning
This is a SDS plus 10mm shank bush hammer bit, not 18mm SDS max shank.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- Best for tuckpointing preparation, to rough the old mortar joints to increase the bonding effectiveness for new filling
- SDS Plus 3/8"(10mm) diameter shank bushing tool.
- 5 7/8 inch overall length
- Fit with SDS Plus rotary hammer drill
- Chrome Steel overall shank
- Stocked in us, receive in 5 days after placing order.
Warning
This is a SDS plus 10mm shank bush hammer bit, not 18mm SDS max shank.
Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
8 Inch SDS Max 4 carbide tip bushing bit, Sds MAX bush hammer bit, bushing tool for rotary hammer (ABBT008)
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
Warning
This is a sds max 18mm shank bushing bit, not 10mm sds plus bit.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- 【Mortar Raking Tuckpointing Bit】Best for tuckpointing preparation, for mortar raking and brick removal, to remove old mortar prior to repointing joints, which can increase the bonding effectiveness for new filling
- 【Surface Roughing & Floor Scraping】The welded 4 carbide tips of this versatile sds plus bit can roughen and remove the surface of concrete, mortar, grout and stone. It can also works as a floor scraper for tile, thinset and grout chipping.
- 【Fit With SDS Plus Rotary Hammer】SDS Plus 3/8"(10mm) diameter shank bushing tool, Fit with SDS Plus rotary hammer
- 【Size】8 inch overall length, 1-1/2 inch wide flat bushing bit
- 【Durable One Piece Shank】Chrome steel durable one piece sds plus shank bushing chisel
- 【4Tips Bushing Head】4 pcs cone shape welded teeth, to ceate CSP 4-5 roughness
- Stocked in us, receive in 5 days after placing order.
Warning
This is a sds max 18mm shank bushing bit, not 10mm sds plus bit.
Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
312 pcs pyramid teeth sandlasting bush hammer roller (ABR013)
Sandblast replacement roller for 5 inch sandblast bush hammer plate.
Pack of 3 pcs
Made of super hard tungsten materials.
Creat fine sandblasitng finish on stone surface, normally used to create anti-slip finish on stone stairs, bathroom floors and other internal surfaces.
Pack of 3 pcs
Made of super hard tungsten materials.
Creat fine sandblasitng finish on stone surface, normally used to create anti-slip finish on stone stairs, bathroom floors and other internal surfaces.
5 5/8 Inch SDS Plus shank 16 carbide tip bushing bit, sds bush hammer bit, bushing tool for rotary hammer (ABBT006)
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
This is a SDS plus 10mm shank bush hammer bit, not 18mm SDS max shank.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- SDS Plus 3/8"(10mm) diameter shank bushing tool
- Chrome Steel overall shank and durable carbide tips
- 5 5/8 inch overall length, 1-1/4*1-1/4 inch square head
- Fit with SDS Plus rotary hammer drill
- Warning: this is not a 18MM SDS max shank tool
- Stocked in us, receive in 5 days after placing order.
This is a SDS plus 10mm shank bush hammer bit, not 18mm SDS max shank.
Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
8 1/4 Inch SDS max shank welded 16 carbide teeth bushing tool, sdd bush hammer bit (ABB002)
•Chrome Steel overall shank and durable carbide tips
•Pack of 1
•8 1/4 inch overall length, 1 1/4*1 1/4 inch square head
•Demolition bushing hammer bit for concrete
•Stocked in us, receive in 5 days after placing order.
Warning
This is a SDS Max 18mm shank bush hammer bit, not 10mm SDS Plus shank.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query
•SDS max 18mm diameter shank bushing to•Chrome Steel overall shank and durable carbide tips
•Pack of 1
•8 1/4 inch overall length, 1 1/4*1 1/4 inch square head
•Demolition bushing hammer bit for concrete
•Stocked in us, receive in 5 days after placing order.
Warning
This is a SDS Max 18mm shank bush hammer bit, not 10mm SDS Plus shank.
Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
300mm plate 6 roller Lichi finish bush hammer tool for electric machine (ABH014-300mm)
For wholesale price, please send email to judy@actintool.com.
| Item No. | ABH014-300mm |
| Product Size | 300mm Diameter |
| Segment Size/Qty | n/a |
| Roller Qty | 6 pcs |
| Arbor Size | M14 5/8"-11 |
| Finish | Lichi |
| N.W&G.W | 10 / 11 kg |
| Usage | Concrete and stone |
| Euipment | Electric machine |
| Package | 1 pcs |
| Delivery Time | 2-7 days after receiving payment |
| Package | Brown/White carton or customized |
| Payment Method | T/T, Paypal, Western Union |
| Shipping | DHL, FEDEX, TNT, UPS etc. |
| Customer Service | Please send email to judy@actintool.com |
45 tips bush hammer replacement roller (ABR020)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
- Bush hammer replacement roller for Frankfurt, HTC, New Grind Rhino and Husqvarna grinder. Suitable for powerful three phase grinder.
- Teeth Qty: 45 tips. Roller 5.3cm Long, 4.9cm diameter
- Pack of 3 pieces roller only.
- Roller only, the holder not included
- Durable cone shape carbide teeth.
Shipping And Return
Fast Shipping: We ship from China warehouse by DHL, Fedex and etc in 2 business days. Normally receive in 10-15 days after placing order.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
450mm plate 9 roller lichi finish bush hammer tool for stone and concrete (ABH015-450mm)
| Item No. | ABH015-450mm |
| Product Size | 450mm Diameter |
| Teeth Size/Qty | n/a/45 |
| Roller Qty | 9 pcs |
| Arbor Size | M14 5/8"-11 |
| Finish | Lichi |
| N.W&G.W | 19 / 20 kg |
| Usage | Concrete and stone |
| Euipment | Electric machine |
| Package | 1 pcs |
| Delivery Time | 2-7 days after receiving payment |
| Package | Brown/White carton or customized |
| Payment Method | T/T, Paypal, Western Union |
| Shipping | DHL, FEDEX, TNT, UPS etc. |
| Customer Service | Please send email to judy@actintool.com |
45 pin bush hammer roller without holder (ABR019)
| Item No. | ABR019 |
| Product Size | 4.5*5.4 CM D*H |
| Teeth Shape/Qty | Cone/ 45 PCS pcs |
| Finish | Lichi finish |
| Connector | Bolt On |
| N.W&G.W | 0.523 / 0.55 kg |
| Usage | Concrete/Stone surface processing |
| Euipment | Handheld or walkbehind machine |
| Package | 1 pcs |
| Delivery Time | 2-7 days after receiving payment |
| Package | Brown/White carton or customized |
| Payment Method | T/T, Paypal, Western Union |
| Shipping | DHL, FEDEX, TNT, UPS etc. |
| Customer Service | Please send email to judy@actintool.com |
11 3/4 Inch SDS max shank 25 carbide tips bushing tool, sds max bushing hammer drill bit (ABB004)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
- SDS max 18mm diameter shank bushing tool
- Chrome Steel overall shank and durable carbide tips
- 25 tips works more agressive than 16 tips
- 11 3/4 inch overall length, 1 1/2*1 1/2 inch square head
- Demolition bushing hammer bit for concrete
- Stocked in us, receive in 5 days after placing order.
Warning
This is a SDS Max 18mm shank bush hammer bit, not 10mm SDS Plus shank.Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
Frankfurt 55mm long roller coarse finish vacuum brazed bush hammer tool (ABRF028)
For wholesale price, please send email to judy@actintool.com.
| Item No. | ABRF028 |
| Product Size | 11.6*10.6*6.9 CM L*W*H |
| Roller Size | 55mm long, 52mm diameter |
| Finish | Vacuum Brazed Coarse |
| N.W&G.W | 1.68/ n/a kg |
| Usage | marble surface processing |
| Euipment | Frankfurt |
| Package | 1 pcs |
| Delivery Time | 2-7 days after receiving payment |
| Package | Brown/White carton or customized |
| Payment Method | T/T, Paypal, Western Union |
| Shipping | DHL, FEDEX, TNT, UPS etc. |
| Customer Service | Please send email to judy@actintool.com |
Frankfurt 39 mm long roller coarse finish vacuum brazed bush hammer tool (ABRF029)
For wholesale price, please send email to judy@actintool.com.
| Item No. | ABRF029 |
| Product Size | 10.4*10*6.8 CM L*W*H |
| Roller Size | 39mm long, 52mm diameter |
| Finish | Vacuum Brazed Coarse |
| N.W&G.W | 1.52/ n/a kg |
| Usage | marble surface processing |
| Euipment | Frankfurt |
| Package | 1 pcs |
| Delivery Time | 2-7 days after receiving payment |
| Package | Brown/White carton or customized |
| Payment Method | T/T, Paypal, Western Union |
| Shipping | DHL, FEDEX, TNT, UPS etc. |
| Customer Service | Please send email to judy@actintool.com |
14 Inch handheld bushing tool for concrete stone surface, handheld bushing bit bushing hammer tool (ABB005)
• Creating rough CSP 5 similar finish on concrete and stone surface.
• 16*16 durable carbide tips head bushing tool
• Head Size: 1.9*1.9*5 3/8 inch
• High quality durable rubber hand
• N.W: 1.72 KG, about 3.8 ibs heavy hammer
• Stocked in us, receive in 5 days after placing order.
For non-US countries, we only ship for orders up to 140 USD. Please send email to judy@actintool.com if there is a query.
• 14 inch handheld bush hammer tool• Creating rough CSP 5 similar finish on concrete and stone surface.
• 16*16 durable carbide tips head bushing tool
• Head Size: 1.9*1.9*5 3/8 inch
• High quality durable rubber hand
• N.W: 1.72 KG, about 3.8 ibs heavy hammer
• Stocked in us, receive in 5 days after placing order.
Shipping And Return
Fast Shipping: For Us Customers, we will dispatch in 2 business days from US warehouse. For Customers outside US, we ship from China warehouse by DHL, Fedex and etc.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
Frankfurt 52mm long roller fine finish vacuum brazed bush hammer tool (ABRF024)
For wholesale price, please send email to judy@actintool.com.
| Item No. | ABRF024 |
| Product Size | 11.6*10.6*7.1 CM L*W*H |
| Roller Size | 52mm long, 51.5mm diameter |
| Finish | Vacuum Brazed Fine |
| N.W&G.W | 1.64/ n/a kg |
| Usage | marble surface processing |
| Euipment | Frankfurt |
| Package | 1 pcs |
| Delivery Time | 2-7 days after receiving payment |
| Package | Brown/White carton or customized |
| Payment Method | T/T, Paypal, Western Union |
| Shipping | DHL, FEDEX, TNT, UPS etc. |
| Customer Service | Please send email to judy@actintool.com |
Frankfurt 39mm long roller fine finish vacuum brazed bush hammer tool (ABRF030)
For wholesale price, please send email to judy@actintool.com.
| Item No. | ABRF030 |
| Product Size | 10.4*10*6.8 CM L*W*H |
| Roller Size | 39mm long, 52mm diameter |
| Finish | Vacuum Brazed Fine |
| N.W&G.W | 1.52/ n/a kg |
| Usage | marble surface processing |
| Euipment | Frankfurt |
| Package | 1 pcs |
| Delivery Time | 2-7 days after receiving payment |
| Package | Brown/White carton or customized |
| Payment Method | T/T, Paypal, Western Union |
| Shipping | DHL, FEDEX, TNT, UPS etc. |
| Customer Service | Please send email to judy@actintool.com |
Frankfurt 52mm long fine finish vacuum brazed bush hammer roller (ABR026)
| Item No. | ABR026 |
| Product Size | 11.6*5.3*5.5 CM L*W*H |
| Roller Size | 52mm long, 51.5mm diameter |
| Finish | Vacuum Brazed Fine |
| N.W&G.W | 1.1/ n/a kg |
| Usage | marble surface processing |
| Euipment | Frankfurt |
| Package | 1 pcs |
| Delivery Time | 2-7 days after receiving payment |
| Package | Brown/White carton or customized |
| Payment Method | T/T, Paypal, Western Union |
| Shipping | DHL, FEDEX, TNT, UPS etc. |
| Customer Service | Please send email to judy@actintool.com |
Frankfurt 39mm long roller fine finish vacuum brazed bush hammer roller (ABR032)
For wholesale price, please send email to judy@actintool.com.
| Item No. | ABR032 |
| Product Size | 10*5.2*5 CM L*W*H |
| Roller Size | 39mm long, 52mm diameter |
| Finish | Vacuum Brazed Coarse |
| N.W&G.W | 0.832/ n/a kg |
| Usage | marble surface processing |
| Euipment | Frankfurt |
| Package | 1 pcs |
| Delivery Time | 2-7 days after receiving payment |
| Package | Brown/White carton or customized |
| Payment Method | T/T, Paypal, Western Union |
| Shipping | DHL, FEDEX, TNT, UPS etc. |
| Customer Service | Please send email to judy@actintool.com |